Wednesday 25 March 2009

Microwaves 'improve fog landings'

Tom Symonds explains how the system works

By Daniel Emery
Technology reporter, BBC News

Passengers flying into Heathrow in fog or poor visibility will be guided in using a new microwave-based system.

The existing Instrument Landing System (ILS) is susceptible to interference, meaning aircraft had to be spaced further apart on their final approach.

The new Microwave Landing System (MLS) is less prone to interference, meaning aircraft can now land at a faster rate.

Initially, the system will be used by British Airways' Airbus 320s, although other airlines are expected to follow.

On a clear day, about 44 planes an hour land at Heathrow.

However, if the visibility drops and aircraft have to use the ILS system to land on full autopilot, that figure falls to 24 aircraft an hour.

This is because the radio transmitter at the end of the runway needs good line of sight to the approaching aircraft, but because it is at the far end of the runway, planes have to land and taxi clear before a full signal is restored.

BA Airbus A321
BA's Airbus will be the first aircraft equipped with MIS

Not only does Heathrow's capacity fall significantly, but because long-haul international flights take priority, domestic and short haul passengers either find themselves circling London in a holding pattern, diverted to another airport, or find their flight has been cancelled altogether.

The new MLS allows an extra six aircraft an hour to land, meaning that while fog will still cause disruption, its effects will be less prominent.

In 2006, four days of heavy fog at Christmas stranded thousands of passengers and resulted in hundreds of cancelled flights to and from Heathrow.

It is thought the cumulative costs of the Christmas fog ran into the tens of millions.

Speaking to the BBC, British Airways' flight operations manager, Captain Tim Price, said that the financial argument in favour of MLS stacks up.

"If we had had this system in December 2006, then the system would have paid for itself within four days," he said.

'Great reputation'

Designed in the 1940s, the ILS system uses two radio signals - one transmitted at the far end of the runway and the other at the side on two separate frequencies - to guide the aircraft down on an approach making a horizontal angle of three degrees with the runway.

MLS, on the other hand, uses a single frequency in a band far removed from that of the ILS system to broadcast the azimuth and elevation (horizontal and vertical angle) data to the aircraft.

The National Air Traffic Service (NATS) says that the new MLS system will guide planes down along the same flight path, so as to not interfere with ILS landings.

BA aircraft in fog
Heathrow can be prone to fog, especially early in the morning

As such, it will not be implementing so-called curved approaches. Rather than the three degree approach in line with the runway, aircraft could - in theory - approach the airport from up to 40-degrees off the end of the runway, lining up with it a mile or so before touchdown.

Even without this feature in the short term, the space between aircraft will be reduced, resulting in more planes landing per hour.

For pilots, the display for the MLS and the ILS is identical, meaning that there is very little training to get air crew up to speed.

Professor Graham Braithwaite, director of the Safety and Accident Investigation Centre at Cranfield University, said that anything that reduced delays at Heathrow had to be welcome.

"This is a precision-approach tool and is something that the International Air Aviation Organisation endorses.

"The challenge for air traffic controllers (ATC), now that distance between planes is reduced, is ensuring you get a good mix of aircraft. The last thing you want is a Fokker 50 flying into the turbulence generated by a 747 flying ahead of it.

"Some aircraft are worse for feeling the effects [of turbulence] than others, but Heathrow ATC would know this better than anyone else and they have a great reputation."

---

Note:

Microwaves are electromagnetic waves with wavelengths ranging from 1 mm to 1 m, or frequencies between 0.3 GHz and 300 GHz.

Apparatus and techniques may be described qualitatively as "microwave" when the wavelengths of signals are roughly the same as the dimensions of the equipment, so that lumped-element circuit theory is inaccurate. As a consequence, practical microwave technique tends to move away from the discrete resistors, capacitors, and inductors used with lower frequency radio waves. Instead, distributed circuit elements and transmission-line theory are more useful methods for design and analysis. Open-wire and coaxial transmission lines give way to waveguides, and lumped-element tuned circuits are replaced by cavity resonators or resonant lines. Effects of reflection, polarization, scattering, diffraction and atmospheric absorption usually associated with visible light are of practical significance in the study of microwave propagation. The same equations of electromagnetic theory apply at all frequencies.

While the name may suggest a micrometer wavelength, it is better understood as indicating wavelengths very much smaller than those used in radio broadcasting. The boundaries between far infrared light, terahertz radiation, microwaves, and ultra-high-frequency radio waves are fairly arbitrary and are used variously between different fields of study. The term microwave generally refers to "alternating current signals with frequencies between 0.3 GHz (3×108 Hz) and 300 GHz (3×1011 Hz)."[1] Both IEC standard 60050 and IEEE standard 100 define "microwave" frequencies starting at 1 GHz (30 cm wavelength).

Electromagnetic waves longer (lower frequency) than microwaves are called "radio waves". Electromagnetic radiation with shorter wavelengths may be called "millimeter waves", terahertz radiation or even T-rays. Definitions differ for millimeter wave band, which the IEEE defines as 110 GHz to 300 GHz.

Electromagnetic spectrum with visible light highlighted

Microwave frequency bands

Letter Designation Frequency range
L band 1 to 2 GHz
S band 2 to 4 GHz
C band 4 to 8 GHz
X band 8 to 12 GHz
Ku band 12 to 18 GHz
K band 18 to 26.5 GHz
Ka band 26.5 to 40 GHz
Q band 30 to 50 GHz
U band 40 to 60 GHz
V band 50 to 75 GHz
E band 60 to 90 GHz
W band 75 to 110 GHz
F band 90 to 140 GHz
D band 110 to 170 GHz

Reference: http://en.wikipedia.org/wiki/Microwave
http://news.bbc.co.uk/2/hi/technology/7961501.stm


Wednesday 11 March 2009

New Google's Ads Algorithm-Interest-based advertising

Today(3/11/2009) Google Teams are launching "interest-based" advertising as a beta test on their partner sites and on YouTube. These ads will associate categories of interest — say sports, gardening, cars, pets — with your browser, based on the types of sites you visit and the pages you view. They may then use those interest categories to show you more relevant text and display ads.

They believe there is real value to seeing ads about the things that interest you. If, for example, you love adventure travel and therefore visit adventure travel sites, Google could show you more ads for activities like hiking trips to Patagonia or African safaris. While interest-based advertising can infer your interest in adventure travel from the websites you visit, you can also choose your favorite categories, or tell us which categories you don't want to see ads for. Interest-based advertising also helps advertisers tailor ads for you based on your previous interactions with them, such as visits to their websites. So if you visit an online sports store, you may later be shown ads on other websites offering you a discount on running shoes during that store's upcoming sale.

Their advertisers and publisher partners have been asking us for a long time to offer interest-based advertising. Advertisers need an efficient way to reach those who are most interested in their products and services. And publishers can generate more revenue when they connect advertisers to interested audiences.

This kind of tailored advertising does raise questions about user choice and privacy — questions the whole online ad industry has a responsibility to answer. Many companies already provide interest-based advertising and they address these issues in different ways. For their part, they're launching interest-based advertising with three important features that demonstrate their commitment to transparency and user choice.
  • Transparency - they already clearly label most of the ads provided by Google on the AdSense partner network and on YouTube. You can click on the labels to get more information about how they serve ads, and the information they use to show you ads. This year they will expand the range of ad formats and publishers that display labels that provide a way to learn more and make choices about Google's ad serving.
  • Choice - they have built a tool called Ads Preferences Manager, which lets you view, delete, or add interest categories associated with your browser so that you can receive ads that are more interesting to you.
  • Control - You can always opt out of the advertising cookie for the AdSense partner network here. To make sure that your opt-out decision is respected (and isn't deleted if you clear the cookies from your browser), they have designed a plug-in for your browser that maintains your opt-out choice.
To find out more about what Google is doing in this important area, please visit:Public Policy blog and Privacy Center.

Keyword advertising has been so successful because it's useful to users, advertisers and publishers — everyone's interests are aligned. They believe that interest-based ads will create the same virtuous cycle, by giving users more relevant ads, while generating higher returns for advertisers and publishers.

Making ads more interesting"

Reference Site : Google